6" Grit 400 Diamond Flat Lap Disc with electroplated grinding
surface for lapidary
|Product Name||6" Grit 400 Diamond Flat Lap Disc with electroplated grinding
surface for lapidary|
|Diameter||6" inch / Close to 150mm|
|Arbor||1/2" inch / 12.7mm|
|#60, #80, #120, #150, #180, #240, #320, #400, #500, #600, #800,
#1000, #1200, #1500, #2000, #3000|
|Working Condition||Wet Polishing|
|Application||The lapidary tools-- flat lap diamond disc is widely used for
polishing Jade, Crystal, Agate, Gemstones etc. In recent years, the
diamond polishing discs are also widely used for electric industry,
photoelectricity , Glass artwork and precision machining industry.|
YSD Diamond Tools accumulated rich experience the manufacturing of
the diamond tools under a very long term process of the production
practise. Through improving the metal bond holding ability of the
diamonds and importing the advanced technical equipment, invalid
diamond grits wear rate during the grinding and polishing could
largely reduced and so that to extend the working life.
About the arbor, the default aror is 12.7mm.If you want to have a
larger arbor, please contact us to chambering in advance. The
chambering service will be charged.
The flat lap diamond discs is between 1mm to 1.5mm. The rough grit
will be thicker than fine grit disc because that the rough diamond
particle is larger than the fine grit diamond particle. (The
roughest grit is #60 with 1.5mm, the finest grit is #3000 with
Totally 16 grits from #60 t0 #3000. They are #60, #80, #120, #150,
#180, #240, #320, #400, #500, #600, #800, #1000, #1200, #1500,
Grit Explanation --Only for your reference.
1)Rough grit is used for rough grinding to make the surface level.
Please pay attenting the entire smoothness durring this process
because there will be a certain removal.
2)At the fine grinding process, the removal is less, you could
chose 4 to 5 different grit number to do the polishing with a the
As you know that DIAMOND is the hardest material in the natural,
scratches will be leaved on the surface of our be polished
products,even if the finest grit #3000 could not reach to the
mirror result. Mirror result need a more finer diamond lapping
paste. So please choose the approprate grit according to your
About the glass edge polishing
We collected the feedbacks from most of our clients which they
think that #320 above grit diamond polishing dics could help you
avoid chipping during the glass polishing. However, this is only
for your reference because every situation may different.
For polishing metal products.
The wastage will be large if you use this flat lap discs to
polishing the metal or alloy metal material. So the working life of
this diamond flat lap discs will be shorter than using this diamond
discs to polishing stones. So please give a carefull consideration
The back face of the diamond disc is metal base . Single
About the diamond polishing disc apperance, the products are
volume-produced , occasionally there will be some scratches, small
oil patch on the back face.But all these deffects won't influence
the actual using. If you are very pay attention on the
appearance.Please give it a carefull consideration before order.
Although this discs could be used under wet or dry , we suggest you
use some water to polish because it will extend the life span.
For more information about the 6" Grit 400 Diamond Flat Lap Disc with electroplated grinding
surface for lapidary , please email me.